Boat owners usually recommend 90 hp for a 16-foot boat as the lowest limit for serious wakeboarding cross on a fully loaded boat. The surest way to determine the amount of horsepower you need for your boat is to know the total weight of your boat. The general rule is to weigh between 25 and 40 pounds per 1 horsepower. If your boat weighs 800 pounds, you'll need a 32- to 20-horsepower engine.
If you want someone to wakeboard behind you, your boat must move at least 20 miles per hour and being able to run 26 to 27 miles per hour is even better for proper scuba diving. When buying a boat for sailing, one of the most important questions is the amount of horsepower your boat requires to tow it. A larger boat with a powerful engine and propeller that submerges deep into the water, along with additional weight for passengers and ballast, will also generate a large and efficient wake for a wakeboarder. Older wakeboarding boats are generally not very good at practicing this sport, but there are ways to improve them.
This will allow the boat to pick up speed more quickly and then apply tension to the line to get a wakeboarder out of the water. A boat with ten people on board and 90 horsepower will cause your boat to move at less than 90 horsepower with just two people on board. Power requirements vary depending on the size and weight of the boat and its load, the type of engine, the sport or activity in which you participate, and the weight and level of experience of the person being dragged behind the boat. For example, if a wakeboarder tends to make a hard cut, the boat may slow down or even stop completely.
Jet boats can practice almost all water sports, but they tend to do worse than propeller boats. For example, if a wakeboarder makes a hard cut, it can cause the boat to slow down and even stop almost completely. A competent wakeboarder can usually try to drive behind the aluminum Jon boat with an engine of only 25 hp at a constant speed of 25 miles per hour.